RC6. My Memory Having a RC Car. My No 4 and 5 RC. 1/10 - 2002, 2 units QD RC car.

That the end of my friend hobby after married. But for me I didn’t stop there, in 2002 when the EP RC in the name of QD 1/10 scale in the market (Made In China). China copycat Japan Tamiys QD RC. Many people buy and modified and play. I bought two 2002 EP QD RC Car a Peugeot and a Mitsubishi Evo (RTR), Picture. Price for 2 RM140. I modified but it didn’t give me satisfaction. For me the GP RC still the best.

Start bloog =10/7/2008

Last update bloog = 04/01/2023

2002 - 2024 = 22 Years

Made in China (🇨🇳) 

Both 5 and 4 in this blog

The original QD RC from Tamiya. Some parts almost same with China QD. But material  quality Tamiya is better.

The Tamiya Brand

This from Tamiya QD original.

The original QD chassis almost same, the circuit board seal and steering servo inside.  Not like China QD very simple

Bottom view original Tamiya QD.

Rear gearbox ori Tamiya

PEUGEOT 206

China Brand

MY First EP from QD product. I respray the body according to rally colour but not 100%

Side View

Rear View

The Control Circuit. 

The Rear Axle Case With 2 Speed Hight and Low

The Steering Linkage eazy broken, they is metal linkage sale.

Then make Changes,  using Servo,Receiver and ESC need to buy

Using a servo to turn the stearing

I am using A Sanwa 27AM Receiver

The Motor i using Original

Using HY ESC

Modification Using Body Post Front

Know Using Pin as Lock Body To Chassis

Rear oWith Body Post

Using Clip

This chassis is same as the Mitsubishi car. To use Mitsubishi  body just extend the front parts.

Just loosen the 4 screw and pull forward

The 4 screw trade just adjust the front parts.

24//2020.found the ion steering arm

Buy few cent only, buy in bunch parts in nilai 3

Modified a long screw

My QD Mitsubishi 

Mitsubishi QD from Tamiya original. 

MITSUBISHI  BODY

My second EP also from QD. Mitsubishi EVO Body. 

Front View

Rear View

The Under Carrage

My first modification, using Car Relay,  No Reverse. I just follow the car that my friend have modified. But his relay is small. 

The Small Motor and Wheel

2009 i modified this QD Mitsubishi, using Futaba Receiver and servo. The steering  using Futaba 3003 servo no more small motor. Did,t changing the  Motor, Run condition not fast. Just for fun to do modification when free time.

The old circuit and the steering Motor.

The Futaba Receive

Using HL ESC

Using Futaba 3003 servo to turn the steering.

The Over View.

I change the Motor in 2011, using car power window motor 12v. Look like it better then the original motor. To run faster i using a 7.2V 5100 mAh  NiMh Battery. To go more faster i use 9V Battery.

At side to prevent dust going in 

Just simple cut two pcs aluminium plate and tighten to hold the motor

Long screw

Use Futaba receiver 

Not using this car original switch 

usig HL ESC

Using 7.2 v battery the car more heavier, more stable. 

use a servo to turn the steering. 

On 22/9/2020 for rc parts hunting at nilai found the steering arm. Metal material. Those days when play ruff on road surfaces the arm will break very thin plastic. If not mistaken a set Rm25. Not buying because this was a toys grade. Until i found it in this rc shop whare many QD parts left un sold. Some in loose. So found 2 and after so long i fitted in. Next 2 set 

Found in loose parts ,only few sen because i buy many rc parts in a bunch.

The plastic arm eazy break,  my i modified using s long screw.

Fitted

Have fun enjoy RC