RC3. My Memory Having A RC Car. My no 1 RC. 1/12 - 1994 Digitcon Jumbo Wheels.
I Started to work in 1993 after 3 years Automotive course in Cheras, on that time i was age 25. Even that i still love RC Car. In 1994 after i get my first year bonus i bought a RC Big Foot by DIGITCON JUMBO WHEELS 1. Scale 1/12 Made in China (RTR),
2. Rear wheel drive,
3. Speed up to 82mph,
4. With two speed Low and High and
5. With Turbo speed.
The price RM150 in SOGO KL pic. This is my first RC car that i bought with my own money. I very happy to own this monster truck, today it still function. In 2009 and 2010 due to itchy hand i modified this Jumbo Wheel.
In 2019 i found a big foot almost same, Tamiya QD clodbuster truck 1/14 scale. The diffrent the front bumper tamiya is small, no sport light at back, Remote and some suspension arm in colour. China copy Tamiya.
Start bloog = 9/7/2008
Last update bloog = 04/01/2023
Total Spending on parts = Rm0
1994 - 2024 = 30 Years
Made in CHINA (🇨🇳).
.jpg)
 |
| Not mine just to show the Tamiya clod buster 1/14 (46012) 1991 almost same as my digitcon. |
 |
| The original box not mine |
 |
| Use the 1991 Tamiya 1/14 Clod Buster user manual. |
My box Made In China
Enjoy RC
 |
| Front side view |
 |
| The specifications |
 |
| The SOGO price tag |
 |
| With Turbo Speed |
 |
| Back view |
 |
| The Original Look |
 |
| The BOX |
 |
| Side view |
 |
| LHS View |
 |
| Side View |
 |
| The Big Front Bumper |
 |
| With Rear Sport Light and Engine Air Duct at the front Bonnet. |
 |
| The Rear with Kangaroo Bar |
 |
| The Under Carrage, The Battery Compartment |
 |
| The Rear Axle With Two Speed Low and High, The shock Absober and Motor inside. |
 |
| The Front Steering Linkage |
 |
The Rubber Tyre with Rough Tread |
In 2009 and 2010 i modified this Monster Truck, using servo to turn the wheel, Use Mechanical Speed Controller to run the motor. The old control unit is been remove. Using Futaba receiver and gun to control the monster truck. Now i can control this Monster Truck from far away then using the old 27mhz system.
 |
| The Old Remote Control Using 27mhz. |
 |
| Lhs speed stick, push fender up is Turbo. |
 |
| The Remote Control Futaba. |
 |
| The Old Battery Case |
 |
| Using 9.6 V 700 mAh Battery (First Modification) |
 |
| In 2010 Second Modification the battery compartment can use two type of battery |
 |
| Using 7.2 V Battery |
 |
| The Original Circuit. |
 |
| Using SANWA Receiver |
 |
| Using Mechanical speed controller from Tamiya The first Try up. |
 |
| Using HY ESC (Second Modification) |
 |
| The Old Steering control, Using a small motor. |
 |
| Using Futaba 3002 to control the steering |
 |
| The full Modification. The Motor Original. First Try up. |
 |
| 2010 Second Modification Using ESC |
 |
| Modification Using Body Pin (Second Modification) |
 |
| The Modification Body Post (Second Modification) |
 |
| Front Blinking Head Lamp |
 |
| With Some Dummy Kit |
 |
| Kit |
 |
| Kit |
 |
| A Winch Cable |
Enjoy RC
Comments
i still have mine and now im work on it to give to my daugther.. lol
nice post by the way..
may i make one question? Do you change something to it work with 9,6V battery or it work fine with original circuit?
I know it's been a long time, but do you still have yours? I still have mine LOL
nice post by the way!
Today I started to repair mine to give to my 4 year old daughter...
May i ask a question?
Was it necessary to make any changes to the original circuit to receive the 9.6V battery? Or was it just adapting the connection?
nice to meet you!
This is a clone RC of Tamiya Clod buster. I bought this cheap toy grade RC made in China. Originsl circute Use 12v battery to operate and use 27mhz can't go far. So i modified using cheap ESC and AM Receiver, that can change mhz Example 27.125, 27.095 27.255. Use 7.2 v battery. The motor i use original 12v.
Know days 2.4 aveleble can use, just buy the 2.4 Radio system.
lipo battery will burn the board because hight boost.