RC97. My Memory Having RC Car. My No 66 RC. Boring projeck October 2026. HSP 94111 parts to 94188 Monster Truck..

 Year 2026, not really looking for RC car, most saler in Facebook sale the same repeated model HSP Flying Fish 94123/V1, Brontosaurus 94111, Sonic 94102, Tamiya TT01 / TT02, VRX. Other old model like yokomo, Hpi, kyosho expensive and less choice. Big 1/8 buggy. From Rm350 to Rm1000++. My budget for secondhand below Rm200. 

Start blogger = 20/10/2026

Update blog = 5/11/2026.

Spending on parts = Rm38

2003 - 2026 = 25 years 

On 20/10/2026 too boring, take out  

all the 94111 Brontosaurus left over parts. Slowly fix every section. After, few parts need to buy.

1. Front/rear axle complete set Rm61.

2. Gear cover Rm8.60

3. 4 pcs battery side stoper Rm8.74.

4. Servo bracket 2 pcs Rm4.37

Total Rm82.71++

This units after done, is my no 66 units rc own. HSP Brontosaurus 94111 out to market 2001 and 94211 using same chassis and parts. Only Changes in brush or brushless motor. Spare parts everyway rc shop or on-line.

Not a hurry projeck will do it when can get cheep parts. Some parts I will try DIY. Not going to fully upgrade use back the copper bushing and plastic suspension arm, shock tower, steering arm.

New idea come 23/10/2026, a saler sale a uncompleted 2003 94188 chassis for Rm50 from Damansara Selangor, will take this 94111 parts put in 94188. Original 94111 produck only EP Monster Truck, no nitro model with same parts. After Brontosaurus, most monster nitro truck use front/rear suspension, steering knuckle front/rear, axle case, different design. Only 94108 Tyrannosaurus using same parts, diffrent on radio box smaller. 

My make over 94188.

The original image

Before 94111 Brontosaurus 

The only parts fix

Image from saller 

Uncomplete 94188 nitro monster truck uncomplete set. In progress buying. 

 

Have radio box, front/rear axle, front/rear shock stay, center double single speed gear, with 2 pcs center dogbone, Bar handle

Parts need to buy for 94188

1. Radio box cover 02111 = Rm9.17.

2. Fuel tank 02004 = Rm8.32

The gear have no brake linkage. 

Fault found

1. No wheels 4 pcs

2. No steering set

3. No servo 2 pcs

4. No brake set

5. No fuel tank

6. No radio box cover 

7. No body post 4 pcs

8. No shock absober 8 pcs

9. No shock stay stud 6 pcs

10. No front/rear suspension arm set.

11. No 18 size engine set

12. No linkage rod for brake and engine.

13. No dogbone 4 pcs

14. No body.

15. Dirty with sand/dust.

16. Single speed gear wrongly fitted.

17. No electrical component 

18. No front/rear bumper

The after fixing left over parts 94111

over view

From top

Rhs front plastic suspention arm, ori damper set 8 pcs.

All ori adjustable linkage 

No front gear box full set. 

Rear

No rear axle full set, drive gear have.

Rhs image

No battery side bracket, center proppeler shaft display no front and rear axle to hold it. 

Drive gear have plastic,not fix yet

No dog bone fitted, in stock 4 pcs

No ball bearing use, all use ori copper bushing 

All screw for temporary use. Will change same size both side. 

Bottom

Front bumper

The wheels rubber new

Rear

Rear bottom

Front bottom 

 

Add 2 more front wheels

Use back the Cooper bushing 

Add the 6.0mm wheels hex. Can't use ori plastick.

Ori wheel carrier 

Add a on/off switch 

Servo to steering linkage ori.

Brush 540 motor

The antena mounting.

27/10/2026 got the 94188 chassis. Look like he open for another units, this as spare parts. 

The overall image

94108 some parts almost same as 94188. Radio tray separately, 94188 together. Location engine servo top side, 94188 at side. Axle case diffrent. Rear bumper diffrent.

Single speed, gear ok. Wrongly fitted 

Rear propeller shaft

Front proppeler shaft 

Rear shock tower same as brontosaurus 

Inside rear shock tower

Steering Servo location, with mounting.

Front shock tower

Inside front shock tower

The carry bar, no brake linkage 

Radio box no cover

Bottom chassis diffrent no hole for front and rear axle mounting

The fuel tank location.

Start removing parts 94188. Some screw Super tighten and some wrongly screw fitted. The speed gear wrongly fitted. Dusty chassis with sand. No damage parts.

Radio tray top

Radio tray bottom

Front axle case diffrent from 94111

Axle case remove front

Different from Brontosaurus 

All using ballbearing 

Bottom mounting togather with housing. Brontosaurus separate.

Gear ok

Inside with greese 

Short rear, front long

Front rear same axle housing 

Single speed housing, the shaft nuckle wrongly fitted, lhs is for front. Rhs knuckle on lhs in brake disc location. The gear wrongly fitted.

The correct setting, brake disc on lhs.

Back side

Single speed gear, using ballbearing, dirt with sand.

All parts remove

After Cleaning 

Speed gear housing total cleanup

Front/rear axle gear total clean up.

The speed housing

Have extra disc brake not same longer, need to buy 02044.

For the cam shaft not sale need DIY.

DIY the cam shaft.

Done DIY cam shaft and use a allen nut as cam stoper.

The axle

New greese and oil

Add new greese 

Done front and rear axle

The steering 

The Brontosaurus steering set need to do adjustment. Mosly the servo push rod on rhs.

All fitted steering set. Use a secondhand servo.

The suspension 

Front end using 94111 parts, fitted nicely. Dogbone need to buy 89.5mm

Front section same 94111.

Using a old fuel tank

The right position 

Fitted rear suspension set

Rear use a smaller bumper. Ori Brontosaurus bumper can fitted.

Using the same shock tower

Radio tray, use a secondhand fuel tank and new servo.

Bottom chassis 

94108 lhs with boxy radio box, 94188 rhs with long radio box.

Parts need to buy

1. Radio box cover metal silver 02111 Rm17.55

2. 4 pcs dogbone 08059 89.5mm Rm10.02

3. Brake set 02044 Rm5.03

4. Brake/engine linkage 02274 Rm5.22

Total Rm37.82.

Got the oder

95% done. no engine. Look ok can move when push, using 94111 suspension parts.

Under rear suspension 

Under front suspension 

Scratch normal

Using dogbone short 85mm

94111 wheels 

All wheels 0 camber.

Oil Shock.

Rear

Front

Rear inside

Front inside 

Using a plastic exhaust 

Add a aluminium exhaust holder

The ori Exhaust manifold and joint

Add 2 engine mounting 

All wheels with ball bearing in and out

6.0 mm aluminium wheel hex.

Add a nitro filter 

Add a air return cooler 

The silver aluminium radio box cover

Add a on/off switch 

The brake caliper

The brake and acceration linkage

Front 87.9mm dogbone

Rear dogbone.

Enjoy RC