RC LOVER

After buying my Kyosho Buggy there is a problem the all 4 wheel is wobble when in full speed where the wheel not touching the ground. To solve this problem the wheel need some balancing. So look into the net found HUDI Wheel Balancing Machine look nice and expensive. I am not joining any competition, i am just to have fun, not practical to buy one, seldom use. So look into my RC Loose parts then this idea came to build my own DIY RC Wheel Balancing. No cash flow out from my pocket. Start bloog = 26/08/2018 Last update bloog = 07/10/2020 Second DIY upgrade  First DIY This is my Kyosho Spider Rear Lower Arm This is a Kyosho Spider Real Wheel Hub Need 2 Pcs 5x10x4mm Ball Bearing Use New Ball Bearing Old Bearing maybe loose or dirty with Sand I am using a damage Wheel Axle from a broken UJ, 2.11mm Pin, Hex Wheel Adapter, Alum 4mm Flanged Nut A 4.5mm Hinge Pin, 3.9mm Turn Buckle, 3.1mm Ball End, 1.7mm Ball End 2x 2.5mm screw with washer and Nut, 2.2mm Screw, 3m

This my no 1 Diorama. (US army maneuver WW II ) start 1991 Finish 2 month time. Model use Tamiya 3 set and Italeri 1 set.. 1. TAMIYA MODEL = US Light Tank M5A1 (35097) 2. ITALERI MODEL = US Paratroopers (0309) 3. TAMIYA MODEL = Brick Wall Set (35028) 4. TAMIYA = US Jeep 1.4 Ton, 4x4 Truck Willy's MB (35015) The real image  The real image  Enjoy Modeling