RC50. My memory having RC car. My No 28 RC. NewQida 1/10 Peugeot 206 - 757/033 2008.
After checking, not function, circuit damage but motor ok. This units i will use the cheap ESC that i have 2 units and steering will modified a servo like my 2 unit QD. This units is new then my first 2 QD. All the chassis, body, circuit is same. The different is the battery cover, My old with company logo and Made in China. This units with company logo and NewQida words. So i assume this from 2008. Because in 2008 this company get the ISO9001, mean now all product with new word NEWQIDA. For this units i will fix the ESC but not for race, Just try up every if ok, remove some electrical parts and display units.
Fault found
1. Circuit damage
2. No remort control
3. Rear wing damage.
4. Chassis dirty with dust and mud
5. Body with mud
6. Antenna broken.
Start bloog = 11/8/2020
Last update bloog = 4/1/2023
2008 - 2024 = 16 Years
Made in China (🇨🇳)
 |
| Front view |
 |
| Other side. |
 |
| Rear view rear wing damage |
 |
| Top view |
 |
| Bottom View no scrarch |
 |
| Front wheel good condition |
 |
| Rear wheel in good condition |
 |
| Rear wing top parts missing. |
 |
| Rear axle with 2 speed low and high |
 |
| Linkage low / high speed. The gear inside still good and with good greese. |
 |
| Front suspension no broken parts. |
 |
| Newqida brand |
 |
| Top is my old cover only company logo and Made in China. Bottom company logo and Newqida . |
 |
| 40Mhz and the on /off switch. |
 |
| Come with a battery with Tamiya connection. |
 |
| Zhaoxin Battery Nicd 700mah 9.6v. Not charging due to negative wire corroded. I change it then can be charge but not sure how long can keep charge. Will test it after putting in the ESC |
 |
| The chassis no modified. Still originalparts |
 |
| Steering motor |
 |
| Real axle ori motor, dirty with mud not rust. |
 |
| Antenna broken |
 |
| The circuit cover. All screw rusty |
 |
| Circuit bottom |
 |
| Circuit top clean but not function. |
 |
| Only front have lighting |
 |
| Total remove all parts for cleaning, no damage parts. |
 |
| All parrs is dirty with dust and mud |
After cleaning and assembly's back.
 |
| All parts been total clean. |
 |
| Clean no more brownies stain |
 |
| Simple parts |
 |
| Rear axle gear clean add grease only. |
 |
| Fix every component back, motor clean with WD40. |
 |
| The low and high gear function |
 |
| Fix back |
 |
| The front steering later modified a servo. |
 |
| Done every component clean |
 |
| Under chassis |
 |
| With clean body. The rear win damage remove |
 |
| Using the cheap ESC buy for Rm3. But in lazada Rm20++. Use flysky 2.4 receiver |
 |
| Slow recharge the battery try up yes still in good condition and power the wheel turns fast |
 |
| The motor still ok can turn fast |
 |
| All component in places. Will remove some electric parts after test. This unit for display only. |
 |
| Position of the servo. |
 |
| I change using small Servo from Hitec KS6SMG metal gear. |
 |
| Fit it in at the original motor bracket, need some modified and use hot glue on it, the steering cut big hole, same as below cover |
 |
| Done |
 |
| Cover up the Esc |
 |
| After body been polish |
 |
| Front view |
 |
| Rear View |
 |
| Top view |
Enjoy RC
Comments