Posts

Showing posts from July, 2014

RC35. My Memory Having RC Car. My No 3/4/5/6/7/ DIY project.

Image
My no 3 DIY.  Most of us have a problem it tuning engine, some time the reading is 3 1/2 turn after we have the manufacture tuning and  running the engine, then we must lean down or reach up the needle so that your RC vehicle will get the maximum power. Most of engine didn't have the reading of  how much to Lean or rich we only use our eye to turn it. In the market there is a  turning dials but in Malaysia i did't see it sale in RC Shop. So what i did, i DIY my self this in a simple turning dials. Start bloog = 29/7/2014 Last update bloog = 5/06/2021 This is the original dials from rc hardware.com, made with aluminum This  is my own DIY dials From the side View There a 2 type of reading that i get from Net, i  photocopy it and use plastic tape to tape it so that the paper will not damage easy. This reading is  0 to 9 center diameter is small This reading also 0 to 9 center diameter is big The second reading 0 to 5 Rich seating and 0 to 5 Lean